6kV~35kV 交聯聚乙烯絕緣電力電纜
XLPE Insulated Power Cable
交聯聚乙烯絕緣電力電纜是采用化學方法或物理方法,使聚乙烯分子由線型分子結構轉變?yōu)槿S網狀結
構,由熱塑性的聚乙烯變成熱固性的交聯聚乙烯,從而提高了聚乙烯的耐老化性能、機械性能和耐環境能力，并
保持了優良的電氣性能。
交聯聚乙烯絕緣電力電纜導體的允許長期最高溫為900C，較低絕緣電纜、聚氯乙烯絕緣電纜和聚乙烯絕
緣電纜高，且具有重量輕、結構簡單、使用方便、耐化學腐蝕和敷設不受落差限制等優點。
近年來，公司先后按IEC標準為全國城網改造、首都國際機場、北京西客站、中央電視臺、安順電廠、泰
山核電站、二灘水電站、北侖電廠、伊敏電廠、揚州二電廠、上海地鐵、寶鋼集團、揚子石化等重點工程提供
該系列產品，質量?jī)?yōu)良，獲得用戶一致好評。CROSS-LINKED POLYETHYLENE(XLPE)INSULATED POWER CABLE
For XLPE insulated power cable, either chemical method or physical method is method is employed to
transform the molecular structure of PE from chain into three-dimensional network, i. e.
thermo-plastic PE is transformed into thermosetting XLPE. After cross-linking, the thermal and
mechanical properties of PE have been greatly improved while its excellent electrical property are
still retained.
The maximum permissible operating temperature of the conductor of a XLPE insulated power cable is
900C which is higher than that of paper, PVC or PE insulated power cable. The cable has the advantage
of simplicity in construction, lightness in weight, convenience in application besides its excellent
electrical, thermal, mechanical and anti-chemical corrosion properties. It can also be laid with
no limitation of level difference along the route.
According to the standards of IEC, in the last few years, We have supplied XLPE cables to the Chinese
urbon power network reconstruction project, Beijing Capital International Airport, Beijing West
Railway Station, CCTV Station, Anshun Power Plant, Qinshan Nuclear Power Station, Ertan Hydroelectric
Power Station , Beilun Power Plant, Yimin Power Plant, Yangzhou Second Power Plant, Shanghai Subway,
Bao Steel Group and Yangzi Petrochemical Company, etc.. The products were given highly evaluation
from customers.
產品標準Standard
本產品按GB12706《額定電壓35V及以下銅芯、濾芯塑料絕緣電纜》標準生產，同時還可根據用戶需要按
國際電工委員會推薦標準IEC、英國標準、德國標準及美國標準生產。The product is manufactured according to the standard of《GB12706 or IEC、BS、DIN and ICEA upon request.
適用范圍Applications
本產品適用于工頻額定電壓3.6/6kv～26/35kv輸配電線路作配送電能子用。
The product is suitable for use in power transmission and distribution lines with rated power
frequency voltage 3.6/6kv～26/35kv.
使用特性O(shè)perating characteristics
· 工頻額定電壓U0/U為3.6/6kv～26/35kv。
Rated power-frepuency voltage U0/U: 3.6/6kv～26/35kv.
· 電纜導體的最高允許工作溫度：90℃。
Max.admissible operating temperature of the conductor:90℃.
· 短路時（最長時間不超過5s）電纜導體的最高溫度不超過2500C。
Max. short-circurt temperature of conductor shall not exceed 2500C.
(5s maximum duration)
· 電纜敷設時環境溫度應不低于00C。
The ambient temperature under installation should not below 00C.
· 電纜彎曲半徑：三芯電纜不小于電纜外徑15倍；單芯電纜不小于電纜外徑20倍。
The bending radius of a single-core cable should not less than 20 times of the cable diameter.
The bending radius of a single-core cable should not less than 15 times of the cable diameter.
電纜額定電壓的選擇 Voltage designation
· 電纜的額定電壓應適合于電纜系統的運行狀況，用U0/U（Um）kv表示。
U0－電纜設計用的導體對地或金屬屏蔽之間的額定工頻電壓；
U－電纜設計用的導體間的額定工頻電壓；
Um－設備可承受的“最高系統電壓”的最大值。
The rated voltage of the cable for a given applixation shall be suitable for the operating conditions
in the system in which the cable is used,and is expressed in the form of U0/U（Um）kv
Where:
U0－The rated power-frequency voltage between conductors and earth metallic screen ,for which the
cable designed;
U － The rated power-frequency voltage between conductos, for which the cable designed;Um－ The maximum value of the“highest system voltage”for which the equipment may beused.
· 三相系統用電纜的U0值推薦如下表：
The values of U0 recommened for cable to be used in three-phase systems are listed below:
U kv U m kv U 0 * kv
A 和 B 類系統 System categories A and B C 類系統 Systems categories C
6 7.2 3.6 6
10 12 6 8.7
15 17.5 8.7 12
20 24 12 18
30 36 18 －
35 40.5 21 26
*：.A類系統──該類系統任何一相導體與地和接地導體接觸時，能在1min內與系統分離
B類系統──該類系統僅包括單相接地故障短時運行的條件，接地故障時間應不超過1h, 但在任何情況下，最
長不超過8h每年接地故障總持續時間不超過125h；
C類系統──不屬于A類、B類的系統。
System category A──This category comprises those systems in which any phase conductor that comes
in contact with earth or an earth conductor. is disconnected from the system within 1 min.
System category B ──This category comprises those system which,under faultconditions,are
operated,are operated for ashorttimewith one phase earthed.This period should not exceed 1 h..Fora
longer period, not exceeding 8h on any occasion, can be tolerated.The total duration of earth faults
in any year should not exceed 125h.
System categeory C──This category comprises all systems which do not fall into A and B電纜的型號Type of cable
型號 名稱 Designation 適用范圍 Application
Type
銅芯交聯聚乙烯絕緣氯乙烯護套電力電纜
YJV Copper conductor,XLPE insulated and PVC
sheathed power cable
鋁芯交聯聚乙烯絕緣乙烯護套電力電纜
室內、隧道及電纜溝等場所，不能承受機械外力。單
YJLY Aluminium conductor, XLPE insulated and
芯電纜不允許敷設在磁性管道中。 For laying
PVC sheathed power cable
indoors 、 intunnel or cable trench,unable to bear
銅芯交聯聚乙烯絕緣氯乙烯護套電力電纜
external mechan-icalforces.Single-core cable in
YJY Copper conductor ,XLPE insulated and
magnetic duct is not permissible
PEsheathed power cable
鋁芯交聯聚乙烯絕緣氯乙烯護套電力電纜
YJLY Alumimium conductor ,XLPE insulated and
PEsheathed power cable
銅芯交聯聚乙烯絕緣鋼帶鎧裝聚氯乙烯護套
電 力 電 纜 Copper conductor ,XLPE
YJV22

尊敬的用戶您好！您咨詢的是遠東電纜生產的特定型號電力電纜——6kV至35kV交聯聚乙烯絕緣電力電纜。 這款電纜的主要特點如下： 1. **電壓等級**：適用在額定電壓范圍為6千伏（6kV）至35千伏（35kV），這意味著它專為中壓配電網設計，適用于輸配電系統中的各種高壓線路和設備間連接，具有良好的電氣性能和安全性。 2. **絕緣材料**：采用交聯聚乙烯（XLPE）作為絕緣層，這是一種高性能、耐熱性好、絕緣強度高的材料，能夠有效防止電擊穿和過電壓情況下的損壞，確保電纜長期穩定運行。 3. **結構類型**：這是一款多芯或多股導線組合而成的電力電纜，通常包括一根或數根導體被XLPE絕緣包裹，并可能有金屬屏蔽層、填充物、鎧裝等其他結構以提供物理防護和電磁兼容性。 4. **產品系列**：遠東電纜以其品牌優勢，生產了這款針對特定電壓等級和應用環境定制的電纜，滿足電力行業對于電纜質量和安全性的高標準要求。 綜上所述，您所詢問的2008型號的遠東電纜是一種針對工業及公用事業領域中壓電力傳輸需求的專業級電纜解決方案。如果您需要進一步的技術參數、價格信息或者采購服務，請告知我具體需求，我會為您提供更詳細的信息和支持。