通過工業以太網CP在S7-300與或S7-400之間組態ISO連接英文版201101
聲明：您必須遵守我們的協議，如果您下載了該資源行為將被視為對《電天下賬號管理規范》全部內容的認可，本網站資源來自原創，僅供用于學習和交流，請勿用于商業用途。如有侵權、不妥之處，請舉報本資源，我們將及時審核處理！
通過工業以太網CP在S7-300與或S7-400之間組態ISO連接英文版201101
通過工業以太網CP在S7-300與或S7-400之間組態ISO連接英文版201101
文本預覽
Cover sheet
Instructions for Configuring an ISO
Transport Connection
S7-300 / S7-400 Industrial Ethernet CPs
FAQ January 2011
?
Service & Support
Answers for industry.Question
This entry originates from the Service & Support Portal of Siemens AG, Sector
Industry, Industry Automation and Drive Technologies. The conditions of use
specified there apply (www.siemens.com/nutzungsbedingungen).
Go to the following link to download this document.
http://support.automation.siemens.com/WW/view/de/47885244
Question
How do you configure an ISO transport connection for data exchange between S7-
300 and/or S7-400 by way of Industrial Ethernet CPs?
Answer
Follow the instructions and notes listed in this document for a detailed answer to
the above question.
Anleitung zur Projektierung einer ISO-Transport Verbindung
2 V1.0 , Entry ID: 47885244Contents
Contents
1 Introduction........................................................................................................4
2 Configuration.....................................................................................................5
2.1 Configuring CP343-1 and CP443-1 Advanced....................................5
2.1.1 Assigning IP addresses to CP343-1 and CP443-1 Advanced.............5
2.1.2 Entering the IP address of CP343-1 in the Hardware Configuration
and downloading the configuration into the CPU.................................8
2.1.3 Entering the IP address of CP443-1 Advanced in the Hardware
Configuration and downloading the configuration into the CPU........10
2.2 Configuring an ISO Transport Connection.........................................13
2.2.1 Configuring a specified ISO transport connection..............................13
2.2.2 Configuring an unspecified ISO transport connection........................17
Anleitung zur Projektierung einer ISO-Transport Verbindung
V1.0 , Entry ID: 47885244 31 Introduction
1 Introduction
You can use the open communication through ISO transport connections for data
exchange by way of the Industrial Ethernet CPs of S7-300 and S7-400.
In this example an S7-300 is connected over the PROFINET interface of the
CP343-1 on the subnetwork 172.16.0.0. The S7-400 on the other hand is
connected over the GBIT interface of the CP443-1 Advanced on the subnetwork
172.16.0.0. The PROFINET interface of the CP443-1 Advanced is connected on
the subnetwork 192.168.99.0.
Configuration overview
Figure 1-1 shows an overview of the configuration.
Figure 1-1
S7-300 S7-400
Anleitung zur Projektierung einer ISO-Transport Verbindung
4 V1.0 , Entry ID: 47885244
CP343-1
CP443-1
Advanced
IP-Adresse PROFINET-Schnittstelle:
ISO-Transportverbindung 192.168.99.121
Subnetzmaske: 255.255.255.0
MAC-Adresse: 00-0E-8C-D9-F0-1D MAC-Adresse: 00-0E-8C-DB-D2-98
IP-Adresse: 172.16.43.2 IP-Adresse Gigabit-Schnittstelle:
Subnetzmaske: 255.255.0.0 172.16.49.99
Subnetzmaske: 255.255.0.0
SCALALANCE X2 Configuration
2 Configuration
Below we describe how to configure an ISO transport connection for sending and
receiving data by way of an Industrial Ethernet CP of S7-300 and S7-400.
2.1 Configuring CP343-1 and CP443-1 Advanced
2.1.1 Assigning IP addresses to CP343-1 and CP443-1 Advanced
The following MAC addresses and IP addresses are used in this configuration.
Table 2-1
Industrial Ethernet CP Interface MAC address IP address Subnet mask
CP343-1 PROFINET 00-0E-8C-D9-F0-1D 172.16.43.2 255.255.0.0
CP443-1 Advanced PROFINET - 192.168.99.121 255.255.255.0
CP443-1 Advanced GBIT 00-0E-8C-DB-D2-98 172.16.49.99 255.255.0.0
Assign the IP addresses to CP343-1 and CP443-1 Advanced.
Follow the instructions below for assigning the IP addresses.
Anleitung zur Projektierung einer ISO-Transport Verbindung
V1.0 , Entry ID: 47885244 52 Configuration
Table 2-2
No. Configuration step Note
1. Connect the SIMATIC Field PG on
which the configuration created with
STEP 7 is stored to the PROFINET
interface of CP343-1.
In Windows network settings
? LAN (Local Area Network) of the
SIMATIC Field PG you enter an IP
address that is in the same
subnetwork as that of CP343-1.
In this example the IP address
172.16.43.100 and subnetwork mask
255.255.0.0 are used for the
SIMATIC Field PG.
2. In the SIMATIC Manager you open
the STEP 7 project that contains the
configurations of S7-300 and S7-400
between which the data is to be
exchanged over an ISO transport
connection.
By means of the menu PLC ? Edit
Ethernet Node you open the "Edit
Ethernet Node" dialog.
Anleitung zur Projektierung einer ISO-Transport Verbindung
Instructions for Configuring an ISO
Transport Connection
S7-300 / S7-400 Industrial Ethernet CPs
FAQ January 2011
?
Service & Support
Answers for industry.Question
This entry originates from the Service & Support Portal of Siemens AG, Sector
Industry, Industry Automation and Drive Technologies. The conditions of use
specified there apply (www.siemens.com/nutzungsbedingungen).
Go to the following link to download this document.
http://support.automation.siemens.com/WW/view/de/47885244
Question
How do you configure an ISO transport connection for data exchange between S7-
300 and/or S7-400 by way of Industrial Ethernet CPs?
Answer
Follow the instructions and notes listed in this document for a detailed answer to
the above question.
Anleitung zur Projektierung einer ISO-Transport Verbindung
2 V1.0 , Entry ID: 47885244Contents
Contents
1 Introduction........................................................................................................4
2 Configuration.....................................................................................................5
2.1 Configuring CP343-1 and CP443-1 Advanced....................................5
2.1.1 Assigning IP addresses to CP343-1 and CP443-1 Advanced.............5
2.1.2 Entering the IP address of CP343-1 in the Hardware Configuration
and downloading the configuration into the CPU.................................8
2.1.3 Entering the IP address of CP443-1 Advanced in the Hardware
Configuration and downloading the configuration into the CPU........10
2.2 Configuring an ISO Transport Connection.........................................13
2.2.1 Configuring a specified ISO transport connection..............................13
2.2.2 Configuring an unspecified ISO transport connection........................17
Anleitung zur Projektierung einer ISO-Transport Verbindung
V1.0 , Entry ID: 47885244 31 Introduction
1 Introduction
You can use the open communication through ISO transport connections for data
exchange by way of the Industrial Ethernet CPs of S7-300 and S7-400.
In this example an S7-300 is connected over the PROFINET interface of the
CP343-1 on the subnetwork 172.16.0.0. The S7-400 on the other hand is
connected over the GBIT interface of the CP443-1 Advanced on the subnetwork
172.16.0.0. The PROFINET interface of the CP443-1 Advanced is connected on
the subnetwork 192.168.99.0.
Configuration overview
Figure 1-1 shows an overview of the configuration.
Figure 1-1
S7-300 S7-400
Anleitung zur Projektierung einer ISO-Transport Verbindung
4 V1.0 , Entry ID: 47885244
CP343-1
CP443-1
Advanced
IP-Adresse PROFINET-Schnittstelle:
ISO-Transportverbindung 192.168.99.121
Subnetzmaske: 255.255.255.0
MAC-Adresse: 00-0E-8C-D9-F0-1D MAC-Adresse: 00-0E-8C-DB-D2-98
IP-Adresse: 172.16.43.2 IP-Adresse Gigabit-Schnittstelle:
Subnetzmaske: 255.255.0.0 172.16.49.99
Subnetzmaske: 255.255.0.0
SCALALANCE X2 Configuration
2 Configuration
Below we describe how to configure an ISO transport connection for sending and
receiving data by way of an Industrial Ethernet CP of S7-300 and S7-400.
2.1 Configuring CP343-1 and CP443-1 Advanced
2.1.1 Assigning IP addresses to CP343-1 and CP443-1 Advanced
The following MAC addresses and IP addresses are used in this configuration.
Table 2-1
Industrial Ethernet CP Interface MAC address IP address Subnet mask
CP343-1 PROFINET 00-0E-8C-D9-F0-1D 172.16.43.2 255.255.0.0
CP443-1 Advanced PROFINET - 192.168.99.121 255.255.255.0
CP443-1 Advanced GBIT 00-0E-8C-DB-D2-98 172.16.49.99 255.255.0.0
Assign the IP addresses to CP343-1 and CP443-1 Advanced.
Follow the instructions below for assigning the IP addresses.
Anleitung zur Projektierung einer ISO-Transport Verbindung
V1.0 , Entry ID: 47885244 52 Configuration
Table 2-2
No. Configuration step Note
1. Connect the SIMATIC Field PG on
which the configuration created with
STEP 7 is stored to the PROFINET
interface of CP343-1.
In Windows network settings
? LAN (Local Area Network) of the
SIMATIC Field PG you enter an IP
address that is in the same
subnetwork as that of CP343-1.
In this example the IP address
172.16.43.100 and subnetwork mask
255.255.0.0 are used for the
SIMATIC Field PG.
2. In the SIMATIC Manager you open
the STEP 7 project that contains the
configurations of S7-300 and S7-400
between which the data is to be
exchanged over an ISO transport
connection.
By means of the menu PLC ? Edit
Ethernet Node you open the "Edit
Ethernet Node" dialog.
Anleitung zur Projektierung einer ISO-Transport Verbindung
